Interior concrete finish · Brisbane
Polished concrete floors Brisbane
A considered polished concrete floor begins with the existing slab. Superfloor Australia prepares, grinds and polishes concrete for residential and commercial interiors across Brisbane, with the finish shaped by the concrete that is actually on site.
Understand the material
The slab is part of the final design
Polished concrete is created by mechanically refining the concrete surface rather than covering it with a separate floor material. Aggregate exposure, sheen and visual variation depend on the slab, the grinding sequence and the chosen finish.
Homes, retail spaces, showrooms, offices and other compatible interior concrete floors.
Desired sheen, aggregate exposure, room use, access and the condition of the existing concrete.
Coatings, repairs, cracks, edges and previous floor coverings are reviewed before the work is scoped.
Finish variables
What changes the look of polished concrete
Reference images are useful, but concrete is not a printed surface. The most credible design conversation starts with the intended appearance and then checks what the particular slab can support.
Aggregate visibility
Grinding depth influences how much stone is revealed. Existing placement and slab variation can affect the result across a floor.
Matte to higher polish
The polishing sequence influences reflection and appearance. The appropriate level should also suit how the room will be used.
Existing slab details
Repairs, cracks, edge work and historic marks may remain visible and can become part of the floor’s character.
Residential and commercial
A continuous floor with a deliberately resolved finish
Polished concrete can work across open-plan residential interiors and commercial spaces when the slab, exposure and maintenance expectations are understood from the beginning.
- Existing and new concrete considered on its own condition
- Edges, stairs, walls and access included in the scope discussion
- Finish expectations clarified before grinding begins
- Care guidance matched to the completed system
Typical workflow
From slab assessment to final finish
The exact sequence varies with the floor. This overview explains the usual decision points without pretending every slab requires the same treatment.
Inspect and define the scope
Review the area, access, current coverings, concrete condition and intended appearance.
Prepare the surface
Remove compatible coatings or residues and address preparation items included in the agreed scope.
Grind to the planned exposure
Mechanically refine the surface in stages, monitoring the actual aggregate and slab variation.
Densify and polish
Continue the specified treatment and polishing sequence to develop the agreed level of finish.
Complete and explain care
Finish the agreed protection steps and provide care guidance appropriate to the completed floor.
Living with the floor
Simple care starts with the right product guidance
Routine dust removal and damp cleaning are commonly part of polished concrete care. Cleaning products should be compatible with the completed system, and spills are best addressed promptly. Superfloor can explain the relevant care approach at handover.
Planning a renovation?
Tell us what was previously on the slab and whether walls, cabinetry or floor transitions are already installed. Those details can affect access, edges and the preparation scope.
Review floor preparationPolished concrete FAQs
Questions to settle before you choose the finish
Can every existing concrete floor be polished?
Not automatically. Existing coatings, damage, previous repairs, slab quality and access all need to be reviewed. An assessment is the right starting point.
Can I choose the exact aggregate pattern?
On an existing slab, aggregate placement is already set. Grinding can reveal it, but the pattern and variation cannot be manufactured after the concrete has cured.
Is polished concrete the same as outdoor honed concrete?
No. Exterior areas have different exposure and use considerations. For patios, paths and pool surrounds, review Superfloor’s outdoor honed concrete service.
How long will the work take?
Timing depends on floor area, access, preparation, repairs, grinding stages and the selected system. Project-specific timing should be confirmed after the slab is reviewed.
Will cracks and repairs disappear?
Grinding does not guarantee that existing slab marks disappear. Repairs and cracks may remain visible and should be discussed as part of the desired appearance.